diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c
index b5a895d..1cd9046 100644
--- a/drivers/fpga/virtex2.c
+++ b/drivers/fpga/virtex2.c
@@ -84,25 +84,25 @@
 #define CONFIG_SYS_FPGA_WAIT_CONFIG	CONFIG_SYS_HZ/5	/* 200 ms */
 #endif
 
-static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize);
-static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
 
-static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize);
-static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize);
+static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize);
 
-int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+int virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
 
 	switch (desc->iface) {
 	case slave_serial:
 		PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
-		ret_val = Virtex2_ss_load (desc, buf, bsize);
+		ret_val = virtex2_ss_load(desc, buf, bsize);
 		break;
 
 	case slave_selectmap:
 		PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_load (desc, buf, bsize);
+		ret_val = virtex2_ssm_load(desc, buf, bsize);
 		break;
 
 	default:
@@ -112,19 +112,19 @@
 	return ret_val;
 }
 
-int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+int virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
 
 	switch (desc->iface) {
 	case slave_serial:
 		PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ss_dump (desc, buf, bsize);
+		ret_val = virtex2_ss_dump(desc, buf, bsize);
 		break;
 
 	case slave_parallel:
 		PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_dump (desc, buf, bsize);
+		ret_val = virtex2_ssm_dump(desc, buf, bsize);
 		break;
 
 	default:
@@ -134,7 +134,7 @@
 	return ret_val;
 }
 
-int Virtex2_info (Xilinx_desc * desc)
+int virtex2_info(Xilinx_desc *desc)
 {
 	return FPGA_SUCCESS;
 }
@@ -153,10 +153,10 @@
  *    INIT_B and DONE lines.  If both are high, configuration has
  *    succeeded. Congratulations!
  */
-static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+	xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns;
 
 	PRINTF ("%s:%d: Start with interface functions @ 0x%p\n",
 			__FUNCTION__, __LINE__, fn);
@@ -352,10 +352,10 @@
 /*
  * Read the FPGA configuration data
  */
-static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
+	xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns;
 
 	if (fn) {
 		unsigned char *data = (unsigned char *) buf;
@@ -404,13 +404,13 @@
 	return ret_val;
 }
 
-static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__);
 	return FPGA_FAIL;
 }
 
-static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
+static int virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize)
 {
 	printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__);
 	return FPGA_FAIL;
diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c
index 7d93d64..6953535 100644
--- a/drivers/fpga/xilinx.c
+++ b/drivers/fpga/xilinx.c
@@ -169,11 +169,11 @@
 					__FUNCTION__);
 #endif
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 #if defined(CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Loader...\n",
 					__FUNCTION__);
-			ret_val = Virtex2_load (desc, buf, bsize);
+			ret_val = virtex2_load(desc, buf, bsize);
 #else
 			printf ("%s: No support for Virtex-II devices.\n",
 					__FUNCTION__);
@@ -226,11 +226,11 @@
 					__FUNCTION__);
 #endif
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 #if defined( CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Reader...\n",
 					__FUNCTION__);
-			ret_val = Virtex2_dump (desc, buf, bsize);
+			ret_val = virtex2_dump(desc, buf, bsize);
 #else
 			printf ("%s: No support for Virtex-II devices.\n",
 					__FUNCTION__);
@@ -268,7 +268,7 @@
 		case xilinx_spartan3:
 			printf ("Spartan-III\n");
 			break;
-		case Xilinx_Virtex2:
+		case xilinx_virtex2:
 			printf ("Virtex-II\n");
 			break;
 		case xilinx_zynq:
@@ -334,9 +334,9 @@
 						__FUNCTION__);
 #endif
 				break;
-			case Xilinx_Virtex2:
+			case xilinx_virtex2:
 #if defined(CONFIG_FPGA_VIRTEX2)
-				Virtex2_info (desc);
+				virtex2_info(desc);
 #else
 				/* just in case */
 				printf ("%s: No support for Virtex-II devices.\n",